Security Link SL150 Instrukcja Naprawy Pobierz pdf (Strona 85)

Section 16 -Zone Programming

16–3

10 INPUT S/N: L

A022-4064 1

Note:

The [A] and [B] keys

may be used to move the

cursor to the right (A) or left

(B) within the serial number

field, thus allowing you to

correct any entry errors that

may have been made.

Serial number Entry and Loop Number Entry

Used only when enrolling wireless transmitters.

a. Transmit two open and close (or close and open) sequences. If

using a button-type transmitter, press and release the button

twice, but wait about 4 seconds before pressing the button the

second time.

b. Manually enter the 7-digit serial number printed on the label of

the transmitter, using the Alpha display keypad. Then press the

[

✱] key – the cursor will move to the “L” position. You can edit

the loop number, if necessary. When the loop number is

acceptable, press [

✱].

c. Press key [C] to copy the serial number previously enrolled

(used when programming a transmitter with several input

loops).

10 INPUT S/N L

A022-4064 ?

Note:

If the [C] key is used to copy the previously enrolled

serial number, the cursor will move to the Loop column (L)

with the previous serial number displayed, and display a

highlighted question ? mark for the loop number.

Enter the loop number and press [

✱

The system will now check for a duplicate serial/loop number

combination.

If a duplicate serial/loop number combination is found, the

keypad will emit a single long beep, and prompt with a “?” again

for a different loop entry.

10 INPUT S/N L

A022-4064 1

If the serial/loop number combination is not a duplicate in the

system, a display showing the serial number and loop number entr

will appear.

Press [

✱

] to continue.

XMIT

CONFIRM

PRESS

✱

TO SKIP

Confirmation Option:

This prompt will only appear if

you answered Yes at the first prompt in this section.

he system will enter a confirmation mode so that the

operation of the actual programmed input can be

confirmed.

Activate the loop input or button that corresponds to this

zone.

If Serial or Loop

Numbers do not match

after activating the

transmitter

If the serial number transmitted does not match the serial

number entered, a display similar to the one below will appear. If

the loop number does not match, it will also be displayed.

Entd A022-4063

Rcvd A022-4064 1

If so, activate the loop input or button on the transmitter once

again. If a match is not obtained (i.e., summary display does not

appear), press the [#] key twice and then enter (or transmit) the

correct serial number.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 143 144

Komentarze do niniejszej Instrukcji

Brak uwag

Security Link SL150 Instrukcja Naprawy Strona 85

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Security Link SL150