Security Link SL150 Instrukcja Naprawy Pobierz pdf (Strona 76)

SL150 Installation and Setup Guide

15–8

✱

60 TROUBLE REPORT CODE (See box on previous page)

1 | 0

This will be sent if a zone goes into trouble.

✱

61 BYPASS REPORT CODE (See box on previous page)

0 | 0

This will be sent when a zone is manually bypassed.

✱

62 AC LOSS REPORT CODE

0 | 0

See box on previous page. Reports with subscriber number. Timing of this

report is random with up to a 4-hour delay. If AC restores before the report

goes out, there is no “AC Restore” report.

✱

63 LOW BAT REPORT CODE

1 | 0

This will be sent when a low-battery condition exists in the system’s standby

battery. See box on previous page. Reports with subscriber number.

✱

64 TEST REPORT CODE

0 | 0

This is sent periodically to test that the communicator and phone lines are

operational (frequency of report is selected in field

✱

51).

See box on previous

page.

Reports with subscriber number.

✱

65 OPEN REPORT CODE

This is sent upon disarming of the system. See box on

previous page.

✱

66 ARM AWAY/STAY REPORT CODE

0 | 0

AWAY STAY

This option allows for independent programming of Away and Stay reports.

2nd digit of report is user number if expanded or 4+2 reporting is selected.

NOTE:

Open reports are not sent if the associated Closing report is not

enabled.

✱

67 RF XMTR LO BAT REPORT CODE (See box on previous page)

1 | 0

This is sent in the event that a wireless transmitter low-battery condition

exists.

✱

68 CANCEL REPORT CODE

(See box on previous page)

1 | 0

This is sent upon disarming of the system after the alarm condition was

reported

RESTORE

REPORT CODES

(

✱

70–

✱

76)

✱70 ALARM RESTORE REPORT CODE

(

1st digit)

This is sent when the zone that caused an alarm is restored to its non-faulted

condition.

✱

71 TROUBLE RESTORE REPORT CODE

1 | 0

See box on a previous page.

This is sent when a trouble in a zone is restored.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 143 144

Komentarze do niniejszej Instrukcji

Brak uwag

Security Link SL150 Instrukcja Naprawy Strona 76

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Security Link SL150